Pleck Red Merlot Masterbatch is not only focused on the production and R&D of color masterbatch, but also on the service of color powder color matching. Due to the economical coloring of toner and the ease of use, especially for the processing of plastic products in small batches and varieties, it is still common for customers who choose to color toner.
In view of the disadvantages such as poor coloring power and poor dispersibility of toner, we chose a high quality dispersant to overcome the shortcomings of simple pigmentation through special dispersion treatment techniques. The company has been engaged in color masterbatch product development and production for 15 years and has accumulated more than 6,000 plastic coloring formulas. Therefore, the complete chromatogram provides customers with very favorable conditions for providing fast color matching services.

Compared with toner coloring, color masterbatch coloring has the following obvious advantages:
1) The problem of environmental pollution brought about by the flying of the toner is improved, and the color change during the use is easy, and no special cleaning of the hopper of the extruder is needed, which makes it more convenient.
2) High pertinence and correct color matching. Since the masterbatch manufacturing factory has already targeted the performance of the applicable resin in the manufacturing process, the pigment (dye), auxiliaries, processing equipment, and processing technology are reasonably selected, and the color difference that may be brought to the different batches of toner in the production process is timely. Corrections and complementary colors are made, and they are checked at the factory. Therefore, color master batches of the same brand number can be guaranteed, and the two batches of colors remain relatively stable before and after.
3) The use of color masterbatch can reduce the aging of the resin properties caused by the secondary processing of plastic products compared with the batch of resins after dry granulation and granulation, which is beneficial to the improvement of the service life of plastic products.

The biggest advantage of using color masterbatch is: In the process of processing, the pigment under the action of additives, the masterbatch is fully mixed with the carrier resin fully mixed. In use, a certain proportion is placed in the resin to be processed, the color master quickly enters the role, and the resin recognizes the "kin". Affinity - The compatibility is significantly better than the pigmentation of the toner. Therefore, it is more understandable for manufacturers who produce films and spinning products.

Of course, color masterbatch coloring also has its limitations, due to the small amount of added plastic products, the processing time is short, by the extruder screw length-to-diameter ratio, the masterbatch dispersion is often not as good as toner. Once more than one manufacturing process, the cost of dyeing must also be higher than the coloring of the toner. When the carrier in the masterbatch differs from the performance of the resin to be colored, undispersed spots, stains, and patterns often appear on the surface of the plastic product. Therefore, the use of the masterbatch is limited due to its compatibility and dispersibility.

There is no absolutely perfect product, nor is it completely bad product. Simply put, the price of toner is cheaper than the masterbatch, and the cost is low, but the coloring effect is not good with the color masterbatch, and the masterbatch color is more stable.